|
||||||
Red Laser diode modules 1200mW & 1500mW
| Home | |
 |
Red diode lasers up with powers of 1200mW and 1500mW available in 635nm and 650nm types
|
Our High power range Diode Lasers are available in power outputs of 1200mW and 1500mW and in 635nm and 650nm types. They come complete with TTL and Analogue Blanking, Active (TEC) cooling, wide input range switch mode power supply and driver board complete with fan cooling. Note stated power is a minimum value - our lasers are normally shipped with outputs in excess of the rated value. These lasers are normally not held on stock and will take around 7 working days from ordering to delivery within the UK. To ensure you get the most competitive price please email or ring for prices. |
|
| Specifications | |||
Wavelength (nm) |
635 & 650 | Polarization ratio | >50:1 |
Output power (mW) |
1200 or 1500 | Noise amplitude (rms) | ~30% |
Transverse mode |
TEM00 | Point stability after warm-up (mrad) | <0.05 |
Operating mode |
CW | Operating temperature (℃) | 10-35 |
Power stability (rms, over 4 hours) |
<2% | Expected lifetime (hours) | 5000 |
Warm-up time (minutes) |
<5 | Dimensions of laser head (mm) | 180(L)*177(W)*62.8(H) |
M2 factor |
<20 | Power supply(85-265V) | 100(L)*85(W)*38(H) |
Beam divergence, full angle (mrad) |
<5 | Net weight (laser head & powers) (kg) | ~5kg |
Beam diameter at the aperture (mm) |
~5.0 | TTL modulation | TTL modulation up to *10kHz |
Beam height from base (mm) |
29 | Analog modulation | Analog modulation up to 10kHzRange 0v-5V |
| Spectral line width (nm) | <0.05 | Warranty time | 1 year |
|
* modulation up to 30Khz available upon request |
||
©2008 Stanwax Laser